2 or 3 poles
Benefits
- High current capacity up to 120 A
- 2 connection types
- 2 or 3 pole
Insulated Bus Bar
Insulated Bus Bar
For the distribution of power in cabinets and housings
Insulated bus bar kit for the power supply in housings and cabinets.
The features of the bus bars:
- High current capacity up to 120 A.
- Safe against accidental hand contact up to 500 V in accordance with VDE 0106.
- The protective profile makes the bus bar safe against accidental finger contact up to 220 V in accordance with VDE 0470.
- Deliverable in any desired lengths.
- With a width of 25 mm, 3-pole use is possible.
- Insulating materials in accordance with the stipulations of VDE 0606
Two connection options are available :
Connection version A:
Alternating terminal lugs for A 6.3 x 0.3 flat push-on connectors and screw attachmentConnection version B:
Alternating terminal lugs for A 6.3 x 0.3 flat push-on connectors and
double terminal lugs for A 2.8 x 0.8 flat push-on connectors or
one A 6.3 x 0.8 flat push-on connector.
Intermediate lengths can be produced by simply sawing.
Technical data
- Number of poles
- 2 or 3 pole
- Connection version A
- A 6,3 x 0,8 DIN 46244/connection Ø 4,2 mm
- Connection version B
- A 6,3 x 0,8 / 2 x A 2,8 x 0,8 DIN 46244
- Utilization category
- -25 °C, +70 °C, keine Betauung
- Phase current
- 120 A at an ambient temperature of 20 °C; 80 A at 55 °C;
70A at 70 °C - Max. operating voltage
- 500 V
- Insulation class
- group C in accordance with DIN/VDE 0110
- Test voltage
- 3,1 kV
- Amp capacity at 20 °C
- 25 A per pin connection A 6,3 x 0,8
- Material
- bus bar: E-Cu F 37, hot-dip tinned
insulating body: Hostacom x 4301, gray
end cap: PC, black
mounting parts: steel, galvanized, yellow chromated - Fire resistance class
- UL 94-V-0